Description

Includes 1 PSER Receiver, 1MBP52 Transmitter, Uni-Directional Headset Mic (AS-HS-U3BK), Rack Ears.

The PSE system is a UHF diversity receiver with16 selectable channels. The multi channel microphone receiverfeatures a volume control, channel display,Diversity Antennasand IR Sync. The PSE has an XLR 1/4″ output and squelch adjustment. The PSE is available with ahandheld,body packwithheadset,lav, or instrument cable.

The PSER can be used and will sync with either theHH52orMBP52transmitters. The HH52 has a gain control and an on/off switch. Both transmitters are powered by 2 AA batteries. The MBP52 body pack transmitter has a 0/-10/Mic selector switch.

• 300′ Range
• 16 Selectable UHF Frequencies
• Diversity Antennas
• Single/Dual Rack MountIncluded

PSER Receiver

• Output Volume Control
• IR Sync Receiver to Transmitter
• AF Level Indicator
• Active Antenna Indicator
• Squelch Adjustment
• XLR / 1/4″ Outputs
• Detachable BNC Antennas
• Metal Chassis

MBP52 Transmitter

• Low Battery Indicator
• 3 Position Switch
• IR Sync Transmitter to Receiver
• Mic/0/-10dB
• Operates on 2 AA Batteries (up to 8 hours Alkaline)
• Dimensions: 3.3″ x 2.6″ x 1″ (85 x 65 x 24 mm) (HxWxD)
• Weight: 2.8 oz (80 g)

HS-U3BK Uni Headset

This uni-directional headset comes standard with theECM,PSE, TRC, DHT,DHX,CTS, &TravelerHeadset Systems. It’s comfortable wrap around design goes over both ears and helps ensure that this mic will stay in place. The HS-U3BKuni headset microphone can be wired to work with transmitters made by Galaxy Audio, Shure, Sennheiser, AKG, and Audio Technica, as well as most other brands of wireless microphone systems.

• Uni directional headset microphone
• Hooks over both ears

PSE ECONOMICAL 16 CHANNEL RACKABLE WIRELESS MIC SOLUTION (UHF) SPECIFICATIONS

PSE SYSTEM SPECS
Available Frequencies	16
Frequency Ranges	CODE D 584~607MHz CODE N 518~542MHz
Band	UHF
Operating Range	Under Typical Conditions 300′ (92 m), actual range depends on RF signal absorption, reflection, and interference.
Audio Frequency Response	(+/-3 dB) 60 Hz ~ 16 kHz
Total Harmonic Distortion	(+/-30 kHz deviation 1 kHz tone): <1%
Dynamic Range	>90 dB A-weighted
Operating Temperature Range	14 F to 122 F (-10 C to 50 C), battery characteristics may limit this range
PSER RECEIVER
Audio Output Level (+/-30 kHz deviation, 1 kHz tone)	XLR Connector (into 600 Ohms load) -12 dBV 1/4″ Connector (into 3 k Ohms load) -18 dBV
Output Connections	1 Male XLR Balanced 1/4″ Balanced
Output Impedance	XLR connector 200 Ohms 1/4″ connector 1 k Ohms
XLR Output	Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio + Pin 3: No Audio –
Sensitivity	-93 dBm for 30 dB
Image Rejection	>90 dB
Casing	Metal Chassis EIA STANDARD 1 U
Dimensions	1.7″ x 8.3″ x 6.3″ (44 x 212 x 160 mm)
Weight	31 oz (880 g)
Power Requirements	12-18 V DC at 300 mA, supplied by external power supply
MBP52 BODY PACK TRANSMITTER
Max Audio Input Level	0 dBV to +10 dBV
Gain Adjust	Mic / 0 dB / -10 dB
RF Output	10 mW
Input Impedance	5 k Ohms
Dimensions	3.3″ x 2.6″ x 1″ (85 x 65 x 24 mm) (HxWxD)
Weight	3.0 oz (85 g)
Power Requirements	2 “AA” size alkaline or rechargeable batteries
Battery Life	About 8 hours (alkaline)