Sale!

Wharfedale WLA-28A Active Line Array Speaker – 2 x 8

Original price was: $1,874.00.Current price is: $98.00.

SKU: IGB3465749956 Category:

Description

The quality and durability of the well established WLA series is now available in an active series. Using Class D amplification, this new series is enhanced with rear panel internal DSP using FIR presets. Ethernet control also delivers remote system management tools through a single cable.

The line-up consists of a 2 x 8 array element, two active floor monitors, a 2 x15 flown subwoofer and the 2000 W continuous WLA-218BA dual 18 subwoofer. A combination which allows for comprehensive systems to be designed, installed and toured.

The system is also compatible with the WLA-28 Common Fly Frame and WLA-28 Dolly Frame and can also be protected using the readily available WLA Series tourbags.

  • Class D amplification
  • Internal DSP presets including FIR
  • Birch plywood construction
  • Integral rigging system
  • powerCON connectivity
  • Ethernet system control
  • Matching 12 and 15 active floor monitors
  • The durability of the classic passive WLA series..but ACTIVE !

INTERNAL DSP WITH FIR
8 x DSP Presets built in including FIR.Easy to get great results fast.For the subwoofers (WLA-28SUBA and WLA-218BA) the AUDIENCE or STAGE presets can be used in an Inverted Stack Gradient array configuration.

SOFTWARE CONTROL
The network connection uses RS485 protocol and gives GUI control over the DSP parameters of each element in the array.

DUAL 8
At the heart of the WLA-28A are 2 x 8 custom Wharfedale Pro LF drivers. These feature 2.0 voice coils to ensure high efficiency and high power handling. These perfectly matched custom transducers are what give aWLA-28Asystem that special sonic impact.

ABOUT THE CLARITY
The new neo HF compression driver delivers additional clarity and performance with enhanced definition. It is custom-made by Wharfedale Pro and is coupled to a 100 x 10 waveguide.

SPECIFICATIONS

System Type Active 8 2-way Bi-Amplified
Frequency Response (+/-3 dB) 60 Hz 20 KHz
Frequency Range (-10 dB) 55 Hz 20 KHz
Loudspeaker Sensitivity @ 1 W / 1 m) 100 dB
Maximum SPL(peak)(@1 m) 132 dB
Nominal Coverage (H x V) 100 x 10
Signal Processing DSP based, 8 FIR presets resident in Input Module
Preset list A) 1 SPKR 100 Hz HPF
B) 2 to 4 SPKR 100 Hz HPF
C) 4 to 8 SPKR 100 Hz HPF
D) >8 SPKR 100 Hz HPF
E) 2 to 4 SPKR
F) 4 to 8 SPKR
G) >8 SPKR
H) CUSTOM
Amplifiers
Amplifier Design Class D
Power Rating: 1500 W Peak (1300 W LF +
200 W HF), 750 W Continuous
(650 W LF + 100 W HF)
Power On Protection Power switch on/off mute
Thermal Protection Amplifier Shut Down. Auto Reset
Low Line Voltage Shut Down 80% Nominal Line Voltage
Driver Protection Independent L/ H Limiters and DC
DC and Short Protection Yes
Limiter Indicator Red LED
Signal Indicator Green LED
Power/Active Indicator White LED
Find Function Indicator Blue LED
Input Sensitivity +4 dBu
Maximum Input Level +18 dBu
Input Impedance Balanced: 10 K
AC Power details Power Supply High Efficiency Switching Mode Power Supply
Connectors
Input Connector XLR 1/ 4Combo jack
Link Connector Balanced XLR pin Connector
UPDATE USB Type B
NETWORK (RS485) RJ45
AC Power Options AC 100-120 V~/ 220-240 V~,50/60 HZ
AC Input Connector powerCON
AC Loop Through Connector powerCON
Hardware Rigging Integral side plate adjustable
rigging 0-10
Enclosure Material and finish 15 mm / 18 mm Plywood
Colour Options Black Rhino Paint
Grille Material & Finish 1.5 Steel
Unpacked dimensions Height 250 mm / 9.84 181 mm / 7.1
Width (Front) 760 mm / 29.92
Width (Back) 760 mm / 29.92
Depth 463.2 mm / 18.23
Packed Dimensions Height 320 mm / 12.6
Width (Front) 830 mm / 32.7
Width (Back) 830 mm / 32.7
Depth 534 mm / 21.0
Net Weight (Kg / lbs) 30.2 Kg / 66.4 lbs
Gross Weight (Kg / lbs) 32.5 Kg / 71.5 lbs

Reviews

There are no reviews yet.

Be the first to review “Wharfedale WLA-28A Active Line Array Speaker – 2 x 8”

Your email address will not be published. Required fields are marked *